Start with a 75% keyboard if you need a smaller board but still reach for the F keys. Drop to 65% if you mainly need arrows and want more room for the mouse. Choose tenkeyless (TKL) if you want the familiar gaps around the arrows and navigation keys. All three usually lose the number pad.
What you keep at each size
- 65%: Dedicated arrows in a narrow case, usually with a short column of navigation keys on the right. The F row lives on a function layer. Check where Delete, Home, and End went before you buy. Their positions vary by model.
- 75%: Keeps the F row and arrows, with a compact arrangement of navigation keys. It’s the middle ground if you write, edit, and play on the same board. Find a layout photo and see whether the arrow keys are tucked into the main block or set off by a gap.
- TKL: Usually gives you the F row, a separate arrow cluster, and the familiar six-key navigation block. It feels closer to a full-size board under your fingers. The extra spacing takes some of the width back.
Those percentages describe the layout rather than the width of the case. Compare the actual dimensions and the manufacturer’s layout photo. Logitech’s illustrated TKL guide explains how the three layouts differ.
Find the keys you would miss in one workday
Mark the keys you hit without looking. Start with Delete, Home, End, PgUp, PgDn, and the F row. Try the shortcuts you use in your editor, spreadsheet, or favorite game. If your workday depends on a key, check whether the smaller board gives it a dedicated place or an easy shortcut. An extra step for a key you tap once a week is easy to live with. An extra step every time you skip to the end of a line gets old fast.
If you use the number pad for a few tasks, a separate one can live in a drawer until you need it. If you enter numbers all day, include the pad in your measurements from the start. The keyboard and pad still have to share the desk with your mouse.
Mark the mouse space before you measure the keyboard
- Place your mouse where your hand naturally lands. Make a few of your widest swipes and mark the space it needs with painter’s tape.
- Measure the clear width that’s left, using the edge of the tape as your limit. Include a small gap so the mouse can clear the keyboard case.
- Tape out the dimensions of a keyboard you’re considering. For a wired board, include the plug and the space the cable needs to turn behind the case. Leave room for a wrist rest if you use one.
Say you have 57 cm of clear width and your mouse needs 22 cm. That leaves 35 cm for the keyboard and the gap beside it. A 33 cm case leaves 2 cm to spare. A 36 cm case crosses into your mouse space even if the listing calls it compact.
Once you know which layouts fit, you can shop by color, key feel, and connection type. Start with our aesthetic wireless keyboard guide. If the obstacle is behind the keyboard, use our monitor arm vs. stand guide to check how much desk depth you could get back.